State of the printer

Initialization/Startup While in the Startup state, the Go, Ready, and Attention lights cycle (at the rate of 500 ms) one after another.

During the Initialization, Reconfiguration, and Job Cancel processes, pressing buttons has no effect.

Reconfiguration Initialization
During the printer start up, you can request special initialization sequences that reconfigure the printer. When one of the sequences is requested, such as cold reset, the lights cycle as in the Initialization/Startup state.

Job Cancel
After the cancellation process has been completed, the printer returns to the
Ready state.

………………………………………………………………………………………………………………………………………………………..

State of the printer

Ready
The printer is ready with no job activity

To print a Configuration page, press and hold the Go button for 5 seconds.
To print a Demo page, press and release the Go button.

………………………………………………………………………………………………………………………………………………………..

Processing Data
The printer is processing or receiving data.

To cancel the current job, press the Cancel button.

………………………………………………………………………………………………………………………………………………………..

Manual Feed or Continuable Error
This state can be reached in the following circumstances:
● Manual feed
● General continuable error
● Memory configuration error
● Personality/Job related error

To recover from the error and print whatever data is possible, press the Go button.
If the recovery is successful, the printer goes to the Processing Data state and completes the job.
If the recovery is unsuccessful, the printer returns to the Continuable Error state.

………………………………………………………………………………………………………………………………………………………..

Attention
The print-cartridge door is open.

Close the print-cartridge door.

HP Laserjet P2015 Fatal Error

Turn off the printer, wait 10 seconds, and turn on the printer.

………………………………………………………………………………………………………………………………………………………..

HP Laserjet P2015  Accessory Error

To display additional error information,press the Go button. The light pattern changes.  When you release the Go button, the printer returns to the initial Accessory Error state.

HP Laserjet P2015 Error Toner Low
The Go, Ready, and Attention lights act independently of the Toner Low state

Order a new print cartridge and have it ready.

………………………………………………………………………………………………………………………………………………………..

HP Laserjet P2015  Toner Missing
The print cartridge has been removed from the printer.

Reinsert the print cartridge in the printer.

………………………………………………………………………………………………………………………………………………………..

Paper Jam

Clear the Paper jam.