The HP PSC 1610 All-in-One Printer does not print

HP PSC 1610 All-in-One Printer does not print.

If your HP PSC 1610 All-in-One Printer and computer are not communicating with each other, try the following.

• Look at the control panel display on the HP All-in-One. If the control panel display is blank and the light next to the On button is not lit, the HP PSC 1610 is turned off. Make sure the power cable is firmly connected to the HP PSC 1610 All-in-One Printer and plugged into a power outlet. Press the On button to turn on the HP PSC 1610 All-in-One Printer.
• Check the USB cable. If you are using an older cable, it might not be working properly. Try connecting it to another product to see if the USB cable works.If you experience problems, the USB cable might need to be replaced. Also verify that the cable does not exceed 3 meters (9.8 feet) in length.
• Make sure your computer is USB ready. Some operating systems, such as Windows 95 and Windows NT, do not support USB connections. Check the documentation that came with your operating system for more information.
• Check the connection from your HP PSC 1610 All-in-One Printer to your computer. Verify that the USB cable is securely plugged into the USB port on the back of your HP PSC 1610 All-in-One Printer. Make sure the other end of the USB cable is plugged into a USB port on your computer. After the cable is connected properly, turn your HP PSC 1610 All-in-One Printer off and then on again.
  
• If you are using a Macintosh: Check the Apple System Profiler (OS 9) or the System Profiler (OS X) to verify your USB connection. If the HP PSC 1610 All-in-One Printer shows up in the USB window, then the USB connection between your computer and HP PSC 1610 All-in-One Printer is working. If it is working, there might be a problem with the software. Try to run the HP PSC 1610 All-in-One Printer Setup Assistant to see if it can detect the HP All-in-One. (You can access the HP All-in-One Setup Assistant through the HP Image Zone software.)
• Check other printers or scanners. You might need to disconnect older products from your computer.
• Try connecting the USB cable to another USB port on your computer. After  you check the connections, try restarting your computer. Turn your HP PSC 1610 All-in-One Printer off and then on again.
• After you check the connections, try restarting your computer. Turn your HP PSC 1610 All-in-One Printer off and then on again.

For more information on setting up your HP PSC 1610 All-in-One Printer and connecting it to your computer, see the Setup Guide that came with your HP All-in-One.