|
Written by Administrator
|
|
Friday, 05 September 2008 16:56 |
|
 HP LaserJet 4200 printers
HP LaserJet 4300 printers
HP LaserJet 4200n 4200tn printers
HP LaserJet 4200dtn printers
HP LaserJet 4300n 4300tn printers
HP LaserJet 4300dtn 4300dtns 4300dtnsl printers
HP LaserJet 4200dtns 4200dtnsl printers Resets submenu
Items on the Resets submenu relate to returning settings to the defaults and changing settings
such as PowerSave.
The section that follows lists the settings and possible values. In the Values column, the default
value for each setting is the one with an asterisk (*) next to it.
| Item | Values | Explanation | | RESTORE FACTORY | There is no value | Performs a simple reset and restores most of the factory | | SETTING | to select. | (default) settings. This item also clears the input buffer for | | | | the active I/O. Restoring factory settings does not affect | | | | network parameter settings on the optional HP Jetdirect | | | | print server. | | | | CAUTION | | | | Restoring memory during a print job cancels the print job. | | CLEAR MAINTENANCE | There is no value
| Appears after the PERFORM PRINTER MAINTENANCE message. | | MESSAGE | to select. | The PERFORM PRINTER MAINTENANCE message can be | | | | temporarily cleared for approximately 10,000 pages, and | | | | then the message appears again. When the PERFORM | | | | PRINTER MAINTENANCE message first appears, a new | | | | maintenance kit should be installed to maintain optimum | | | | print quality and feed performance. | | POWERSAVE | OFF | Turns PowerSave mode on or off. PowerSave mode does | | | *ON | the following: | | | | minimizes the amount of power consumed by the | | | | printer when it is idle | | | | reduces wear on electronic components in the printer | | | | (turns off the display backlight, but display is still | | | | readable) | | | | The printer automatically comes out of PowerSave mode | | | | when you send a print job, press a printer control panel | | | | button, open a tray, or open the top cover. | | | | You can set how long the printer remains idle before it | | | | enters PowerSave mode. |
|
|
Last Updated ( Friday, 05 September 2008 17:12 )
|
