How to Install the HP LaserJet Pro P1102w on a wireless network

The HP LaserJet Pro P1102w can connect to wireless networks,
How to Install the HP LaserJet Pro P1102w on a wireless network
Install the HP LaserJet Pro P1102w on a wireless network with HP Smart Install

NOTE: This installation type is supported for Windows only.
The HP Smart Install allows you to install the product driver and software by connecting the HP LaserJet Pro P1102w to a computer through a USB cable. If the HP LaserJet Pro P1102w previously has been installed on a network, reset the wireless defaults.

NOTE: The installation CD is not required during a HP Smart Install. Do not insert the software installation CD into the computer CD drive.

1. Turn on the HP LaserJet Pro P1102w, and then connect the USB cable to the HP LaserJet Pro P1102w and the computer. The installation program should start automatically.
   
   ● If the HP Smart Install program does not start automatically, AutoPlay might be disabled on the computer. Browse the computer and double-click the HP Smart Install drive to run the program. If you cannot find the HP Smart Install drive, use the product installation CD to install the software.
   ● If the program prompts you to select a connection type, select the connection type you will use to print to the HP LaserJet Pro P1102w after installation.
2. Follow the onscreen instructions to complete the product installation.
3. When the installation is complete, if you want to verify that the product has a network IP address,print a configuration page. Press and hold the HP LaserJet Pro P1102w cancel button until the ready light blinks,and then release the button to print the configuration page.

Install the product on a wireless network with the software CD

1. Insert the software CD into the computer CD tray.
   If the installation program does not start automatically, browse the CD contents and run the SETUP.EXE file.
2. Follow the onscreen instructions to complete the HP LaserJet Pro P1102w installation.
3. When the installation is complete, if you want to verify that the HP LaserJet Pro P1102w has a network IP address,print a configuration page. Press and hold the product cancel button until the ready light blinks, and then release the button to print the configuration page.

Install the software for a product currently on the network
When the product previously has been installed on a network computer (so that it already has an IP address), and you want to install the printer driver on another computer, complete the following steps.

1. At the computer, open the HP Embedded Web Server.
2. Click the HP Smart Install tab.
3. Click the Download button.
4. Follow the onscreen instructions to complete the HP LaserJet Pro P1102w installation.