How to Clean the fuser HP Laserjet P3005 Printers

If you get any toner on your clothes or hands, wash them in cold water. Hot water will set the toner into
the fabric.and How to Clean any toner from the fuser HP Laserjet P3005 Printers Run the device cleaning page to keep the fuser free of toner and paper particles that can sometimes accumulate. Accumulation of toner and particles can cause specks to appear on the front or back side of your print jobs.
To ensure optimum print quality, HP recommends that you use the cleaning page every time that you replace the print cartridge.
The cleaning procedure takes about 2.5 minutes to complete. A CLEANING message appears on the device control panel display while the cleaning is taking place.
In order for the cleaning page to work correctly, print the page on copier-grade paper (not bond, heavy,or rough paper).

Create and use the cleaning page
1. If your device model includes a duplexer, open the rear output bin.
2. Press Menu to open the menus.
3. Use the UP button or the DOWN button to scroll to CONFIGURE DEVICE, and then press SELECT .
4. Use the UP button or the DOWN button to scroll to PRINT QUALITY, and then press SELECT .
5. Use the UP button or the DOWN button to scroll to CREATE CLEANING PAGE, and then press SELECT .
6. Follow the instructions on the cleaning page to complete the cleaning process.
7. If your device model includes a duplexer, close the rear output bin.