Error Writing/Output to USBnnn or MPUSBPRNnn
Have you replaced an ink tank with a new one? is Displayed
Low Ink Warning Displays Ink Tank with '?'
Error Writing/Output to USBnnn or MPUSBPRNnn
Ensure that the printer is turned on.
If the POWER lamp is off, turn the printer on.
When the POWER lamp is flashing green, the printer is initializing. Wait until the POWER lamp stops flashing.
There is a possibility that the "No paper" error has not been reset.
Load paper and press the RESUME
/CANCEL
button.
Ensure that the printer port setting corresponds to the printer interface connection.
(1) Open the Printer Properties dialog box.
See Opening the Printer Properties Dialog Box Directly from the Start Menu
(2) Click the Ports tab (or Details tab), and then select MPUSBPRNnn (Canon iP90) or USBnnn (Canon iP90) ("n" represents a number) in the Print to the following port.
Ensure that the printer is securely connected to the computer.
Verify the printer port status.
(1) Right-click My Computer and select Properties.
(2) Click the Hardware tab, Device Manager , and double-click Universal serial bus controller , USB Printing Support.
In Windows Me or Windows 98, click Universal serial bus controller on the Device Manager tab, and then double-click Canon iP90.
(3) On the General tab, ensure that there is any indication of a problem with the device.
If spooling action is abnormal, disable it to send the print data directly to the printer and try printing again. (In Windows Me or Windows 98)
(1) Open the Printer Properties dialog box.
See Opening the Printer Properties Dialog Box Directly from the Start Menu
(3) Click Spool Settings, and then select Print directly to the printer.
There may be a problem in the printer driver. Uninstall the printer driver and then reinstall it.
See Uninstalling Printer Drivers
Have you replaced an ink tank with a new one? is DisplayedIf an ink tank is removed, a confirmation message of ink tank replacement may be displayed before the next print job.
If an ink tank has been replaced with a new one:
Click Yes and select the replaced ink tank to reset the ink counter.
If the ink tank has not been replaced with a new one:
Click No to close the dialog box.
You can choose to disable the display of a confirmation message.
(1) Ensure that the printer is turned on.
(2) Open the Printer Properties dialog box.
See Opening the Printer Properties Dialog Box Directly from the Start Menu
(3) Click the Maintenance tab and then click Low Ink Warning Setting icon.
(4) Clear the check box of Display a confirmation message of ink tank replacement off and click Send.
Low Ink Warning Displays Ink Tank with '?'If the following icons are displayed in BJ Status Monitor, the ink level and ink counter are not matched.
Reset the ink counter from the printer driver when you replace the ink tank.
Turn the low ink warning off until you replace the ink tank to stop the warning message.
(1) Ensure that the printer is turned on.
(2) Open the Printer Properties dialog box.
See Opening the Printer Properties Dialog Box Directly from the Start Menu
(3) Click the Maintenance tab and then click Low Ink Warning Setting icon.
(4) Clear the check box of Display low ink warning off and click Send.
(5) When the confirmation message is displayed, click OK.
Clear the check box of Display the Remaining Ink Level
to stop displaying the ink level.
(1) Ensure that the printer is turned on.
(2) Open the BJ Printer Utility.
See Opening the BJ Printer Utility
(3) Select Remaining ink level setting from the pop-up menu.
(4) Clear the check box of Display the Remaining Ink Level and click Send.
Other Error Messages
If the BJ Status Monitor is displayed, follow the on-screen instructions.
If an error occurs during printing, the error dialog with the BJ Status Monitor is displayed. Follow the dialog message instructions.
Refer to "Low Ink Warning Displays Ink Tank with '?'"as it is in the case.
If one of the following messages is displayed outside of the BJ Status Monitor:
Could not spool successfully due to insufficient disk space
Increase the amount of free space on the disk by deleting any unnecessary files.
Could not spool successfully due to insufficient memory
Increase available memory by closing any other applications currently running.
If you still cannot print, restart Windows and try printing again.
Printer driver could not be found
Uninstall the printer driver and then reinstall it.
See Uninstalling Printer Drivers
Background printing failed (In Windows Me or Windows 98)
Restart Windows and try printing again.
Could not print Application name - File name
Try printing again once the current job is finished.
If a message with the format "Error No.: n" is displayed:
Ensure that the printer is turned on, and that the printer and the computer are securely connected. If the problem remains, verify the Printer Setup Utility (or Print Center) setting. If you are using an OS other than Mac OS X v.10.3, start Print Center and verify the setting.
(1) Open the Printer Setup Utility (or Print Center ).
See Printer Setup Utility (or Print Center)
(2) Ensure that the iP90 is displayed in the Printer List.
The printer has a built-in waste ink absorber* to hold the ink used during Print Head cleaning. Eight flashes indicates that this absorber is nearly full.
Press the RESUME/CANCEL button to clear the error so you can continue printing. Before the waste ink absorber becomes completely full, contact a Canon service representative.
*The waste ink absorber absorbs ink used during cleaning, for example. When you experience this error, you will need to call for servicing to replace the waste ink absorber and to check the printer for proper operation.
Disconnect the camera cable, press the RESUME/CANCEL button to the printer and reconnect the cable.
If the error is still unresolved, the digital camera or digital video camcorder that is not supported by this printer. Use a digital camera or digital video camcorder compatible with this printer.
