Photo Stickers PS-101

Photo Stickers PS-101 is a peel-and-stick sheet that allows you to make your original stickers using your favorite photo. It is a glossy sheet and is highly resistant to water. On each sheet, you can print 16 photo stickers with excellent printing quality. This media is available in the size of 4" x 6" / 101.6 x 152.4 mm.

 Loading

 Load each sheet with the glossy side up. Printing on the back side can stain the inside of the printer or your clothes.

 Place the sheet in portrait in such a manner that the top margin is larger than the bottom margin. For more information, refer to the instructions on the back of the sheet package.

 Load one sheet at a time.

 If a sheet is curled, uncurl it before loading.

 Do not use a sheet from which stickers are going to come off or you have peeled off stickers.

 Set the Paper Thickness Lever (gray) to the right.

 Printer Driver Settings

 Media Type: Photo Paper Plus Glossy

 Page Size: 4" x 6" / 101.6 x 152.4 mm

 Handling of Printed Output

 Remove each sheet as soon as it is printed.

Note

When printing a Photo Stickers (PS101) sheet, it is recommended using the PhotoRecord (v2.2 or later) provided with the printer. It is easily printed by selecting "16-Sticker Label" from "Perforated Paper" menu in the "Select Printer & Album Type" of the PhotoRecord (Windows only).



Back      Next     Top of Page