Loading

 Load the paper with the whiter side facing up.

 A maximum of 10 sheets can be loaded at once.

 Be sure to set the paper to portrait regardless of the direction to print.

 To prevent sheets from sticking to each other in the time of using A4/Letter paper, separate them from each other before loading them in the Auto Sheet Feeder. Load the necessary number of paper (a maximum of 10 sheets) in the Auto Sheet Feeder one at a time.

 Set the Paper Thickness Lever (gray) to the right.

 Printer Driver Settings

 Media Type: Glossy Photo Paper

 Page Size: Ensure that the setting matches the size set in the application.

 Handling of Printed Output

 Remove each sheet as soon as it is printed.

 Do not touch the printed surface nor stack the printed sheets until the ink is fixed (approx. two minutes).

 Printing Area

See Printing Area

Note

When you use Borderless Printing, create the data by using the same size as the paper size, and paste the data so that it fills the editing screen without leaving any margins. If you are using an application that allows you to set margins, set the left, right, top and bottom margins to 0 mm or 0 inches. For instructions on setting margins, refer to the user's manual for your application.