This is a matte water-resistant paper and provides superior color reproduction. It is ideal for printing high quality photographs. This media is available in A4/Letter and 4" x 6"/101.6 x 152.4 mm sizes.
Loading
Load the paper with the side that does not have logos facing up.
A maximum of 5 sheets of A4/Letter paper can be loaded at once. A maximum of 10 sheets of 4" x 6" / 101.6 x 152.4 mm paper can be loaded at once.
To prevent sheets of paper from sticking to each other in the time of using A4/Letter paper, separate them from each other before loading them in the Auto Sheet Feeder. Load the necessary number of paper (a maximum of 5 or 10 sheets) in the Auto Sheet Feeder one at a time.
Printer Driver Settings
Media Type:
Photo Paper Plus Glossy
Page Size:
Ensure that the setting matches the size set in the application.
Handling of Printed Output
Do not stack more than 5 sheets in the Paper Output Slot Cover.
When printouts can be arranged without stacking them up, allow them to dry for about 24 hours. When printouts need to be stacked up, allow them to dry for about 24 hours with plain paper (e.g., copying paper) inserted between the adjacent printouts after allowing each printout to dry for about 15 minutes.
Avoid drying printouts with a hair dryer or by exposing them to direct sunlight.
Storing Printed Output
Store printouts in photo albums, plastic folders, and photo frames to protect them from direct exposure to air.
Plastic folders protect printouts from color fading.
Avoid storing printouts in an adhesive-type album, as you may not be able to remove them.
When storing printouts in a pocket-type album, insert them in the pockets as far as they will go. The edges of the printouts may turn yellow depending on the type of pocket album.
Avoid storing printouts in a hot or humid location or in direct sunlight. Store them in a normal operating environment.
Avoid displaying or exhibiting printouts outdoors or in direct sunlight.
Printing AreaSee Printing Area
