Photo Paper Pro PR-101

This is a thick paper with a treated surface that enhances gloss and provides superior color reproduction. It is ideal for printing high quality photographs. This media is available in A4/Letter and 4" x 6" / 101.6 x 152.4 mm sizes.

 Loading

 Load the paper with the glossier side facing up.

 A maximum of 1 sheet of A4/Letter paper can be loaded at once. A maximum of 10 sheets of 4" x 6" / 101.6 x 152.4 mm paper can be loaded at once.

 Set the Paper Thickness Lever (gray) to the right.

 If the paper is curled, flatten it before loading.

 Printer Driver Settings

 Media Type: Photo Paper Pro

 Page Size: Ensure that the setting matches the size set in the application.

 Handling of Printed Output

 Do not stack more than 5 sheets in the Paper Output Slot Cover.

 Do not touch the printed surface until the ink is fixed (approx. 30 minutes).
Colors in dark images may appear indistinct at first, but become clearer after about 30 minutes.

 When printouts can be arranged without stacking them up, allow them to dry for about 24 hours. When printouts need to be stacked up, allow them to dry for about 24 hours with plain paper (e.g., copying paper) inserted between the adjacent printouts after allowing each printout to dry for about 15 minutes.

 Avoid drying printouts with a hair dryer or by exposing them to direct sunlight.

 Storing Printed Output

 Store printouts in photo albums, plastic folders, and photo frames to protect them from direct exposure to air.

Plastic folders protect printouts from color fading.

Avoid storing printouts in an adhesive-type album, as you may not be able to remove them.

 When storing printouts in a pocket-type album, insert them in the pockets as far as they will go. The edges of the printouts may turn yellow depending on the type of pocket album.

 Avoid storing printouts in a hot or humid location or in direct sunlight. Store them in a normal operating environment.

 Avoid displaying or exhibiting printouts outdoors or in direct sunlight.

 Printing Area

See Printing Area

Note

When you use Borderless Printing, create the data by using the same size as the paper size, and paste the data so that it fills the editing screen without leaving any margins. If you are using an application that allows you to set margins, set the left, right, top and bottom margins to 0 mm or 0 inches. For instructions on setting margins, refer to the user's manual for your application.



Back      Next     Top of Page