|
Written by Administrator
|
|
Sunday, 20 April 2008 13:45 |
|
 HP LaserJet P2015 printer ● 27 ppm (Letter-size), 26 ppm (A4-size)
● First page out in as few as 8.5 seconds
● ProRes 1200 (provides fine-line detail at 1200 x 1200 dpi)
● FastRes 1200 600x600x2
● 600 dpi (provides 600 x 600 dpi output with Resolution Enhancement Technology [REt] for improved text)
● 50-sheet multipurpose tray (tray 1)
● 250-sheet enclosed input tray (tray 2)
● Optional additional 250-sheet input tray (tray 3)
● EconoMode
● Print watermarks, booklets, multiple pages per sheet (N-up), and first page on different media than the rest of the document
● 32 MB RAM
● Memory can be upgraded to 288 MB
● 3,000-page or 7,000-page print cartridge
● PCL 6, PCL 5e, and HP postscript level 3 emulation (printer automatically determines and
switches to the appropriate language)
● Compatible with USB 2.0 specifications
● Supported by Windows® 98 (printer driver only), Me (printer driver only), 2000, Server 2003
(printer driver only), XP 32-bit, XP 64-bit (printer driver only)
● Supported by Macintosh OS X V10.2.8, V10.3.9, V10.4.3
● On/off switch
● HP ToolboxFX (provides printer status information, troubleshooting information, and printer
configuration information)
● Embedded Web server (EWS) with internal pages that are localized in 16 languages
● 45 HP fonts
● 35 HP postscript emulation level 3 fonts Super NVRAM initialization HP LaserJet P2015 printer This feature is similar to NVRAM initialization, except all of NVRAM is re-initialized (including the
configuration parameters not reset by an NVRAM initialization). Use the following procedure to perform an NVRAM initialization. 1. Turn off the printer.
2. Press and hold the Go button.
3. Turn on the printer and continue to hold the Go button for at least 50 seconds.
During this process, the Attention, Ready, Go lights turn on. Then the Attention and Ready lights turn off,
leaving only the Go light illuminated. 4. Release the Go button. The Go, Ready and Attention lights turn on.
5. Press and hold the Go button. All lights turn off. During the next three seconds, the Go, Ready
and Attention lights turn on in that order, one per second.
6. Release the Go button to perform the initialization. The control panel lights begin cycling from
front to back. After the Super NVRAM initialization process is complete, the printer returns to the
ready state. |
|
Last Updated ( Thursday, 12 June 2008 19:31 )
|
